{"id":724,"date":"2010-06-06T22:36:30","date_gmt":"2010-06-07T02:36:30","guid":{"rendered":"http:\/\/synergylightingusa.com\/?p=724"},"modified":"2010-06-06T22:36:30","modified_gmt":"2010-06-07T02:36:30","slug":"cfl-light-bulbs-pose-fire-risk","status":"publish","type":"post","link":"https:\/\/mrmuckle.com\/hansen\/2010\/06\/06\/cfl-light-bulbs-pose-fire-risk\/","title":{"rendered":"CFL Light Bulbs Pose Fire Risk"},"content":{"rendered":"

With the ever growing steps in energy conservation, many consumers find great savings in using Compact Fluorescent Light Bulbs known as CFL’s.\u00a0\u00a0 The light bulbs create tremendous energy savings and produce less heat than their incandescent predecessors.\u00a0 However consumers must beware of the cautions associated with use of these lamps.<\/p>\n

\"CFL<\/a>CFL’s are designed to replace incandescent lamps in most portable and non-portable fixtures, such as table lamps and wall mounted fixtures.\u00a0\u00a0\u00a0 The limitation of using these CFL bulbs is their use in outdoor applications and enclosed fixtures.\u00a0\u00a0 CFL’s such as spiral lamps are permissible in enclosed fixtures, providing that they are specially designed for that application and limited to 42 Watts or less.\u00a0\u00a0\u00a0 CFL lamps greater than 42 watts are designed for use only indoors with open rated fixtures.\u00a0\u00a0 Many manufacturers of these higher wattage CFL’s, such as TCP, Maxlite, and Sunlight Brands expressly denote that these high wattage CFL Lamps are not for use outdoors or enclosed fixtures due to risk of fire.<\/p>\n

\"TCPI<\/a>According to Ellis Yan, Chief Executive Officer of TCPI the nations largest producer of CFL lamps, “The high wattage CFL’s are designed with an integral cooling fan to reduce the heat levels produced from overheating the electronic components.\u00a0\u00a0 Using these lamps in enclosed fixtures may pose a serious risk to consumers”.\u00a0 Education is a passion for Ellis that extends into the company\u2019s business philosophy.<\/strong>He has been instrumental in establishing consumer and school education programs to share the energy efficient and environmental benefits of using compact fluorescent lamps (CFLs). He is also dedicated to health and wellness and has developed incentive programs encouraging employees to make decisions that are good for their health and the environment.<\/p>\n

In 2008, the Office of National statistics reports there were 1033 fires caused from misuse of CFL light bulbs.\u00a0\u00a0 Energy Star, a joint effort between the Department of Energy and the Environmental Protection Agency, CFLs installed in enclosed fixtures designed for incandescent bulbs may overheat. This can pose serious risk of injury or fire, and significantly reduce both light output and lifetime.\u00a0 Even under optimum conditions, light output from a CFL will decrease over its lifetime. To maintain existing light levels, select CFLs with rated lumen output (of bulb and ballast together) at least as high as the bulbs they replace.\u00a0 CFLs should have a power factor (PF) above 50% and a Color Rendering Index (CRI) above 80%. ENERGY STAR-qualified integral CFLs and most available modular CFLs meet these criteria.<\/p>\n

Particularly for high-use fixtures, consider replacing an existing screw-based (“incandescent”) fixture with one designed exclusively for CFL use\u2014i.e., a fixture with a hard-wired ballast that accommodates pin-based CFLs. (Residential CFL fixtures are also covered by an ENERGY STAR labeling program.<\/p>\n

For More Information<\/a><\/h2>\n